5 Tips for Cleaning Up Water Damage Cleanup In Rutland

water damage cleanup rutlandThere’s nothing worse than having to clean up water damage, but it doesn’t have to be so bad. Here are 5 tips for cleaning up water damage: When you think about it, water is pretty amazing. It can be a source of life, and it can also be incredibly destructive. When you have water damage, you’ll want to clean up the mess as quickly as possible so that mold doesn’t start growing in your home. Here are 5 tips for cleaning up water damage:

Water Damage Cleanup In Rutland

Step 1: Check for Water Supply Shut Off

If the source of your water leak is coming from a supply line or the toilet, the first step is to shut off the water. If you don’t know where your supply line shut-off valve is located, then look for it on the inside wall near where your main water shutoff valve is. To locate this main shut-off valve, check where your house’s main lines enter into or exit out of your house (usually near an exterior wall).

If you’re not sure how to turn off either type of valve, ask a friend or neighbor who may be familiar with plumbing jobs in order to save yourself some time and hassle.

Step 2: Stop the Flow of Water

If you see water coming from a pipe or drain, turn off the water supply immediately. If you don’t, you could be faced with even more extensive damage.

There are two places to look for a valve that controls the flow of water: under your sink; and on the outside of your home (near where it connects to the main). Turn off both valves.

If there’s no valve under your sink, search around for any obvious signs of leaks—such as wet spots on cabinets or floors—and then follow them back to their source in order to shut off the tap that has been leaking all this time!

If you do not have any luck finding either valve, call an expert plumber who can find where exactly in your house there is an issue so that it can be repaired as soon as possible before things get worse!

Step 3: Remove the Standing Water and Excess Moisture

Now that you’ve removed the majority of the water from your home, it’s time to start removing the excess moisture. To do this, you’ll need two things: a wet/dry vacuum and clean towels or rags.

Use your wet/dry vacuum to suck up any standing water that remains around your home. The best way to do this is by running over areas repeatedly with the hose of your vacuum until all traces of standing water are gone. Then use a bucket or mop and towels to soak up any remaining puddles on hard surfaces in your home (like tile floors). 

Finally, use a squeegee—or simply put some muscle into it!—to force water off hard surfaces such as wood floors, countertops and walls so that it doesn’t sit there overnight leading to mold growth (and more cleanup work for yourself later).

Step 4: Dry and Dehumidify the Affected Area

If the water damage is extensive, you’ll need to dry and dehumidify the area. To do this, turn on fans and dehumidifiers to help speed up the drying process. If the affected area is too large for you to handle alone, rent a blower. It will force air through walls, floors and ceilings more quickly than a fan alone can do. Be sure that it’s well ventilated so that mold doesn’t start growing in your home while you dry out your water-damaged areas!

If there are any wet spots on walls or ceilings after they’ve dried completely (usually 24 hours), replace them with new drywall or insulation if needed before painting over them with fresh coats of paint over time until everything looks brand new again!

In addition to these steps above we highly recommend calling professionals.

Step 5: Clean, Disinfect, and Restore the Damaged Area

Once the water has been removed, you can begin to clean and disinfect the damaged area. First, wipe down any surfaces with a dry towel. Next the area should be wiped down with a cleaning solution such as vinegar or bleach, which will kill germs and bacteria. Once this is done, you can use soapy water to clean any remaining stains or spills that may be present in order to prevent mold growth in these areas.

Once everything has been cleaned, it’s time to consider if there are any items that need replacing due to damage caused by flooding or other water-related issues (such as burst pipes). Be sure also to clean up all debris—including spilled food items and trash—out of your kitchen or bathroom so that you can restore it back into its original state once repairs have been made!

If hiring someone else for repairs isn’t feasible on your budget at this time, then consider doing those chores yourself rather than putting them off until another day when circumstances might allow more freedom from financial burdens like debt payments but without taking away from important responsibilities such as caring for children who require constant attention during school hours each day.

If you’re looking for a solution for water damage, it’s critical that you employ a team that’s reputable and reliable. At GW Savage, we’re committed to our customers and our community; if it comes to cleaning up damage from mold or other water-related problems, call us for the treatment you need. You’ll see why we’re the best choice in water damage cleanup in Rutland!